2019 Jeep Wrangler Problems

The wiring harness for the rearview camera and the center brake light may short circuit, which can disable the rearview camera image and center brake light. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 111, "Rear Visibility" and 108, "Lamps, Reflective Devices, and Associated Equipment." A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash. Additionally, a center brake light that fails to illuminate can fail to indicate to other drivers that the vehicle is slowing down, increasing the risk of a crash.

Fix: Dealers replaced the harness for the center brake light and rearview camera and/or the spare tire carrier/harness assembly, as necessary, free of charge. All vehicles were repaired by January 15, 2024.

The instrument cluster can develop an internal short circuit and stop working, so the speedometer and warning lights may not display. Without that information, the risk of a crash goes up.

Fix: Dealers will replace the instrument panel cluster at no charge.

The clutch pressure plate may overheat and break apart. Overheated clutch parts can cause a fire, and debris or a sudden loss of drive can raise the risk of a crash.

Fix: The dealer will replace the clutch assembly and update the software at no cost to you, and this recall expands and replaces earlier recall 21V-028.

The clutch pressure plate may overheat and fracture. Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

Fix: FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021.

In the event of a crash, a front seat belt retractor may not properly slow the occupant's forward movement after locking. In the event of a crash, if the front seat belts fail to lock, there is an increased risk of injury.

Fix: Chrysler will notify owners, and dealers will replace the front seat belt retractors, free of charge.

A software error can keep the rearview camera image on the radio display after the car is out of reverse, which can distract the driver. This increases the risk of a crash and means the vehicle does not meet federal mirror safety rules.

Fix: The dealer will update the radio display software free of charge, or you can choose to receive the update remotely over the air.

The clutch pressure plate may overheat and fracture. The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

Fix: Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed.

These vehicles have improperly machined steering column stub shafts that may break, possibly causing the steering wheel to detach from the steering column. If the steering wheel detaches from the steering column, the driver may lose control of the vehicle, increasing the risk of crash.

Fix: Chrysler will notify owners, and dealers will inspect the steering column, replacing it, as necessary, free of charge.

The front track bar brackets may be improperly welded, which can cause the bracket to separate from the frame, reducing steering capability. An unexpected reduction in steering ability, can increase the risk of a crash.

Fix: Chrysler will notify owners, and dealers will inspect and repair the track bar bracket welds, as necessary, free of charge. The recall is expected to begin November 17, 2018.